ati-infotech
asked on
Cisco Aironet 1231G not allowing confiure menu/ Cisco LWAPP Controller
We purchased a new Cisco Aironet 1231G. I have worked with the 1200 series before but never this model. When I log into the console, I can get to enable mode but the unit does not take a "conf t" command. It does get an address and when I try to web into the address, I get no response. Pings to it resolve, albeit DHCP and not statig (no configure menus). I notice when consoled the message:
LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve
CISCO-LWAPP-CONTROLLER.myd omain.com
Translating "CISCO-LWAPP-CONTROLLER.my domain.com "
Do these new models require some type of controller (like the SonicWALL SonicPoints) or am I missing something obvious? I have scoured Cisco site and by my interpretation of the readings, there should be some type of wireless controller device. If that is the case, and I don't want to use an 1100 series AP, is there an alternative?
LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve
CISCO-LWAPP-CONTROLLER.myd
Translating "CISCO-LWAPP-CONTROLLER.my
Do these new models require some type of controller (like the SonicWALL SonicPoints) or am I missing something obvious? I have scoured Cisco site and by my interpretation of the readings, there should be some type of wireless controller device. If that is the case, and I don't want to use an 1100 series AP, is there an alternative?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
The link in the above solution is a dead Link... please update it or remove the post as it useless
ASKER