duncaninnz
asked on
SBS 2011 Email not receiving
I have just setup an SBS 2011 server and configured exchange 2010. I changed dns to point at the mail server and port 25 is open in the router. I have confirmed port 25 accessibility although I dont seem to be able to telnet to the server. Mail is not being received. I have configured receiving domain and send connector. There are errors in the log id 12014 indicating a problem with the certifiacte. I need to get mail working ASAP. Any help would be appreciated.
ASKER
DNS was changed last night and I have tryed sending from an external location. No mail comes through. From that external location I have confirmed the MX record points to the ip address of our server.
Telnet doesnt connect comes up error 421 4.3.2 service not available. However I can telnet to the old 2003 server if I change the port forwarding in the router
Telnet doesnt connect comes up error 421 4.3.2 service not available. However I can telnet to the old 2003 server if I change the port forwarding in the router
Not very...Just Check the firewall and Antivirus settings on the Exchange Server it self
Does your Internal mails work?
Does your Internal mails work?
ASKER
Internal mail is working. Ive added a firewall rule to forward port 25 but not made any difference
ASKER
How can I resolve the certificate error. Sounds like it may be related
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Yes that resolved it thankyou. We had to run the fix my network wizard as well. This fixed the smtp connectors. I gues in future I need to just learn how to run a wizard. thanks for your help
Telnet to port 25 from outside and try sending a mail
http://www.wikihow.com/Send-Email-Using-Telnet
Does your internal mails work?